As mentioned earlier, WiFi networks are usually used in conjunction with broadband Internet access and the myth is, "the faster the WiFi transfer rate, the faster my Internet access will be". Forgetting that the fastest commonly available broadband access hovers in the region of 512kbps. With this in consideration it becomes apparent that the choke point of the broadband Internet access occurs at the broadband modem's ability to receive bandwidth rather than the WiFi equipment's ability to transfer data wirelessly. Why then do we need 54Mbps of WiFi bandwidth?

In a typical wired network, data flows at 100Mbps on a 100-BaseT network which is a little shy of double the 802.11g WiFi bandwidth. One of the reasons why large institutions do not retrofit their entire operations with WiFi networks is the high data transfer rate that occurs between computers within their network. Similarly, 54Mbps only becomes useful where high transfer rates are required on a WiFi network between computers or other WiFi-related equipment like your living room stereo in the case of Apple's Airport Express. Until affordable, commercially available broadband Internet access that carries a bandwidth that can match available WiFi transfer rates, fast WiFi does NOT equate to faster Internet access.

Assuming that you are using your WiFi network for broadband Internet access, you will need the following:

• broadband modem and broadband Internet access account with an Internet Service Provider (ISP)
• WiFi router
• WiFi adapter for your computer, this can be built-in or external

Diagram 1.0 Basic hardware required for WiFi network

You will most likely purchase your broadband modem from your ISP or in some cases get it for free. WiFi can be used with most broadband modems (eg ADSL or cable) provided the broadband modem comes with a RJ45 jack that utilises a CAT5 UTP cable as the medium to connect to your WiFi router. USB broadband modems will NOT get the job done, you need to come out with some extra dosh to get a broadband modem with a RJ45 jack. This is your first investment toward the land of WiFi Merryment.

Diagram 1.1 RJ45 connector attached to CAT5 UTP cable

For simplicity in setting up, cable Internet access is more desireable over ADSL which requires keying in of username and passwords. This will be covered in greater detail in following articles in this series.

Whilst the broadband modem brings the Internet into your home or office, the WiFi router is the heart of your WiFi network. Its function mirrors a radio broadcasting station whilst the WiFi adapter works as a receiver. To dispel the myth that macs only work with Apple base stations, they work equally well with non-Apple WiFi routers. This interoperatibility is the essence of mac's creed.

There are a plethora of WiFi router manufacturers in the market but some of the more notable brands of WiFi router equipment include (in no particular order):

WiFi networks require a broadcasting device, the WiFi router, and a receiver to receive and transmit data back to the broadcast station. Every computer attached wirelessly to your WiFi network must be equipped with a WiFi adapter which can come in two flavours:

• built-in to the computer
• external/removeable, form factor includes USB adapters and PCMCIA card adapters

Both conduct similar functions and neither exercise obvious superiority over the other. Although, it has been reported that external WiFi adapters which come equipped with mini-antennas can work over greater distances away from the WiFi router.

Apple's range of Airport cards can be regarded as a hybrid form factor, in that they can be removed but once attached to the machine form an integral part of its total form factor. This is made possible because Apple manufactures all their computers with built-in antennas that provide an interface for the Airport card to connect to once its attached to the computer, eg most Apple notebooks have their WiFi antennas built-into the rims of their screens whilst the older Titanium PowerBooks' antennas are laced around the internal base of the notebook's casing.

For most Apple computers, the recommended and most times only option is to install the appropriate Airport card for your model of computer although, the 15"/17" PowerBook series can be installed with an external WiFi adapter owing to the existence of a PCMCIA slots in these models. Non-Apple, mac-compliant, WiFi cards may also be installed in PowerMacs and older Apple notebooks that were manufactured before Apple designed WiFi into the form factor.

The following are some of the the most common considerations relating to hardware before making your purchasing decision:

1. effective WiFi range, most WiFi routers have an effective range up to 30 feet but this is not a real yardstick as the layout of your home or office may impede this optimum range, its a good idea to test the effective WiFi range before making a purchase. In instances where one WiFi router does not provide sufficient coverage, setting up a bridged network may be necessary involving the purchase of more than one WiFi router
2. potential interference, plan the placement of your WiFi router carefully. Since WiFi operates on a radio frequency, it is subject to interference from other radio emitting devices, eg cordless telephones and electric gates are the most common causes of erractic WiFi network bandwidth
3. number of users,, at press time Apple's Airport Extreme base stations can support up to 50 users on mac/PC platforms whilst Apple Airport Express supports 10 users on mac/PC platforms
4. interoperatibility, at press time Apple Airport Extreme and Express base stations ships with more PC-friendly firmware for mac/PC hybrid networking (eg WPA support) in contrast to older Airport base stations. Apple Airport Express sports the latest firmware capable of supporting wireless network printing from both mac/PC platforms. Apple Airport Extreme base stations utilise Apple's 'rendevouz' protocols which do not support PC network printing. Its also a good idea to check whether the printer you intend to pair with your WiFi router has available drivers to support network printing via the appointed WiFi router

Stay tuned to Macriot for the follow-up to these series that will discuss setting up, deployment and securing of WiFi networks.